How to Build a Shelf with a Wood Gallery Rail

How to Build a Shelf with a Wood Gallery Rail

We’re in the midst of a little laundry room refresh and I’ve been slowly completing projects to update this space. We finished it almost 7 years ago and it’s one of the most used rooms in our home (after the kitchen). But now that we have 3 kiddos and my style has evolved it’s time for some changes! My most recent project was building a shelf with a wood gallery rail and I’m here to share all the details with you!

How to Build a Wood Gallery Rail Shelf

When we first completed the laundry room, we put a shelf on the wall above the washer and dryer that was around 5′ long. I have no idea why I decided on that length or why I didn’t extend it all the way across the wall. It was early in my design journey and the laundry room was the first room I’ve ever designed from top to bottom!

The more I looked at it, it just seemed unbalanced and there was more room for additional storage and functionality. So I came up with the idea to create a shelf with a wooden gallery rail on top and a hanging brass rail on the bottom.

I was inspired to create the wood gallery rail after creating a dog food holder for Oakley out of larger wood spindles. Brass gallery rails have become super popular in design – we have one in our kitchen and I love it – but I wanted to put a different spin on it. A lot of older antiques have this element which is such a beautiful detail, and I wanted to do it in a more modern way that would fit my style better.

SUPPLIES FOR SHELF WITH A WOOD GALLERY RAIL

STEP 1

Drill the holes for your finials. You’ll want to measure out your spacing first – I spaced mine 2.5″ apart from one another but you can do whatever looks best to you! I placed them about 1/2″ from the front edge of the board.

DIY Shelf with Gallery Rail

To drill the holes I used a 5/8″ drill bit. You could also use a spade bit but since those have a pointy end, I didn’t want to risk drilling through the wood!

STEP 2

Trim the top part of the finials off. It was fairly easy to drill into the shelf board, but drilling into the corner round would be really tricky. So to avoid this, I just trimmed off the top part of the finials so that the corner round could sit flat.

I used the band saw to do this and it was so quick and easy! If needed, you can then sand down the tops for a completely smooth surface.

STEP 3

Cut and miter your corner round. It helps to place your finials in the holes to get a better idea of ​​where the corner round will sit. Then you can use your miter saw set at a 45° to cut each piece.

Building a Shelf with a Wood Gallery Rail

STEP 4

Drill the holes in your corbels. If you have a drill press that’s the easiest way to do this, but we don’t so I used some clamps and my regular drill. The copper pipe I used for the “brass rail” is 1/2″ and I used a 5/16 spade bit for the holes.

I stained my corbels first, but I suggest drilling first and then staining!

DIY Shelf with Corbels

Start by clamping two corbels together. Make sure they are aligned the proper way (ie. the brackets on the back are facing the same way). Eye ball the center area of ​​your corbel where you want the pipe to go and drill down as straight as you can through both corbels.

Once you’ve done the first two, take one of them and place it on top of a non-drilled corbel. Use this as a template to drill into the one underneath. Repeat until all corbels have been drilled through.

STEP 5

Now that all your wood is cut and ready it’s time to stain. I used a wood conditioner first which helps to eliminate splotching and gives you a nice even finish. You can apply this with a black foam brush.

DIY Wood Shelf with Rail

Then I used my favorite Dark Walnut Gel Stain to stain everything. I used a staining pad for the actual shelf and corbels and then used a small craft paint brush for the finials. Then I wiped the finials off on a rag to remove the excess.

STEP 6

Once the stain is dry, apply a top coat. I used General Finishes High Performance Top Coat in Satin and only did one coat since this isn’t going to get a lot of action 😉

STEP 7

Cut your copper pipe. Before you cut, measure out the length you need by placing the two end corbels on the wall. This will give you a more precise measurement but you do have some wiggle room since the pipe will sit an inch or so into the corbels.

We decided to have the pipe go all the way through all 5 corbels in one piece but you could also cut the pipe into sections and have the seams be hidden within the corbels.

Cutting copper pipe is super easy with this little pipe cutter you can get at the home improvement store.

STEP 8

Spray paint your pipe. I used this gold leaf spray paint and then this clear coat on top of that.

DIY Hanging Brass Rail

STEP 9

Create your wood gallery rail! Glue your finials into the holes you drilled and then glue the corner round on top. This DAP Rapid Fuse glue is my favorite. It dries super fast and is so durable!

Wood Gallery Rail Shelf

STEP 10

Hang your shelves! Pull the pipe through the corbels and hook the corbels onto the screws in the wall. We were able to use some of the existing holes that were there already and then had to drill new holes on either end. To drill into tiles, just make sure you use a masonry bit!

Shelf with Brass Rail

We had a little trouble getting all 5 corbels to slide into BOTH screws for each one so we ended up using only one screw per corbel and it was still super sturdy.

STEP 11

Spray paint your hooks to match the pipe. Whatever color you spray your pipe, make sure you use the same for your hooks if they aren’t a good match. I used these shower hooks and love the little ball detail they have.

Now it’s the fun part – time to decorate and enjoy your shelf!

Vintage Modern Laundry Room
DIY Wood Gallery Rail
Vintage Cozy Laundry Room

This wood gallery rail shelf feels SO much better than the original one did in this space. I love that it fills up the full length of the wall and has an additional brass rail underneath to hang things from. It’s also a lot prettier and adds a lovely touch of charm and character to our laundry room.

What do you think? Would you build your own shelf with a wood gallery rail?